FMUSER INTERNATIONAL GROUP INC. 广州市汉婷生物技术开发有限公司
3
1 Introduction
The RDS-C encoder is a result of more than 10 years experience collecting and meets requirements of most
regional, local, RSL, LPFM and other medium- and small-coverage radio stations. It’s also highly suitable for service
and development purposes.
Fully digital concept and uniquely effective design ensures high reliability, excellent signal characteristics and gives
the user many advanced features while maintaining low acquisition costs. We can say the RDS-C brought new
standard to this branch.
1.1 Main Highlights
Fully dynamic stand-alone RDS encoder
RS-232 control interface based on a set of simple ASCII commands
Control software includes powerful Windows GUI application and HTML based system
Amazing text features, 25 kB of memory reserved for text messages (equivalent to more than 3200
PS strings)
Excellent compatibility with broadcast automation systems
Advanced weekly scheduling
Easy and fast set-up
1.2 Other Features
Excellent spectral purity, direct digital RDS signal synthesis at sampling rate of 361 kHz (oversampled);
compliant with EN 50067 / EN 62106
Firmware updates are free
Addressing feature - independent or common control of up to 255 units in a network
Bypass relay, high reliability
External TA and Program switch
Switchable MPX loopthrough mode
Internal real-time clock incl. backup battery, showing real-time also as PS
No special 19 kHz input needed - pilot tone carefully recovered from MPX signal
Digital 57 kHz phase locked loop - rock stable RDS subcarrier in all cases
CE conformance notice:
This device complies with the requirements of the EEC Council CE marking and EMC directives.
Harmonized standards applied: EN 55022 (B ITE class), EN 55024.
Please read this entire manual and familiarize yourself with the controls before attempting to use this equipment.
Where not otherwise indicated, any information mentioned in relation to the RDS (Radio Data System) applies in full
also to the RBDS (Radio Broadcast Data System).
The equipment has been thoroughly tested and found to be in proper operating condition when shipped. The
manufacturer is not liable for any damages, including but not limited to, lost profits, lost savings, or other incidental or
consequential damages arising out of the use of this product.
No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical,
including photocopying, recording or information storage and retrieval systems, for any purpose other than the
purchaser's personal use.
Information in this document is subject to change without notice.
To Next Page
Loading...