FMUser RDS-C - 11.3 EON Commands

FMUSER INTERNATIONAL GROUP INC. 广州市汉婷生物技术开发有限公司
29
11.3 EON Commands
EONxAF EON x Frequencies
(87.6-107.9)
List of Other Network frequencies that can be received in the area covered by linking
station. Each item is in MHz representation in range of 87.6-107.9 MHz. Up to 25
items allowed.
EON1AF=98.0,99.3
Sets 98.0 and 99.3 MHz frequencies for Other Network 1
EONxAFCH EON x Frequency channels
H (01-CC)
List of Other Network frequency channels that can be received in the area covered by
linking station. Each item is in hexadecimal representation in range of 01-CC (87.6-
107.9 MHz). Up to 25 items allowed.
EON1AFCH=01,3B
Sets 87.6 and 93.4 MHz frequencies for Other Network 1
EONxEN
EON x Enable
(0, 1)
Enables (1) or disables (0) the link to the Other Network.
EON1EN=1
EONxPI
EON x Program Identificati
on
H (0000
-
FFFF)
Identification code of the Other Network. Always contains four hexadecimal digits.
EON1PI=24F1
EONxPIN
EON x Program Item Number
The code in DD,HH,MM format should enable receivers and recorders designed to make use of
this feature to respond to the particular program item(s) that the user has preselected.
EON1PIN=12,16,40
EONxPS
EON x Program Service name
Program Service name of the Other Network.
EON1PIN=12,16,40
EONxPTY
EON x Program Type number
(0
-
31)
Program type number of the Other Network.
EON1PTY=3
EONxTA
EON x Traffic Announcement
(0, 1)
If set to 1, switches the receiver to corresponding Other Network for duration of the traffic
announcement.
Can’t be set to 1 if:
corresponding Other Network has TP=0
corresponding Other Network is not enabled
The EON1TA flag can be also controlled by external TA/EON1TA switch.
Note: Setting any EON TA to 1 also causes a series of 14B group type transmission.
EON1TA=1
EONxTP
EON x Traffic Program
(0, 1)
Traffic Program flag of the Other Network.
EON1TP=1
*EON
Store all EON data into EEPROM
Stores all EON data into EEPROM. TA flags are not stored.
*EON
x is in range 1-4