FMUser RDS-C - 11.4 Messages Commands

FMUSER INTERNATIONAL GROUP INC. 广州市汉婷生物技术开发有限公司
30
11.4 Messages Commands
MSGxx
Text Message
Specifies the message text. Since there is a place for 99 messages in memory, the
number xx must be in range 01
-
99.
MSG01=Hello World
MSGxxD
Message Destination
(0
-
3)
Specifies the destination of the message used for automatic message switching. The
number xx must be in range 01-99.
0
- Message not used for automatic switching
1
-
DPS2
2
- RT2
3
-
DPS2 and RT2
MSG01D=1
MSGLIST
List of Messages
Shows all messages present in the memory and its destination.
MSGLIST
DPS2MSG
Dynamic PS 2 Message Number
(0
-
99, AUTO)
0
- Default DPS2 text specified by
DPS2
command or last
DPS2MSG
command is
selected.
1-99 - The message of the number is selected for the DPS2.
AUTO - Messages are selected automatically in ascending order. Only messages
chosen by the
MSGxxD
command are selected.
DPS2MSG=AUTO
RT2MSG
Radiotext 2 Message Number
(0
-
99, AUTO)
0
- Default RT2 text specified by
RT2
command or last
RT2MSG
command is selected.
1-99 - The message of the number is selected for the RT2.
AUTO - Messages are selected automatically in ascending order. Only
messages chosen by the MSGxxD command are selected.
RT2MSG=1
xx is in decimal range 01-99