FMUser RDS-C - 11.5 Scheduling Commands

FMUSER INTERNATIONAL GROUP INC. 广州市汉婷生物技术开发有限公司
31
11.5 Scheduling Commands
S List of Scheduling Items
Shows all scheduling items. Items with no day specified are not showed.
Each item is represented by the following order: Item No., Days, Times, Command, PTY.
S
SEN Scheduling Enable (0, 1)
Enables (1)/disables (0) the scheduling feature.
SEN=1
Enables the scheduling feature.
SxxC
Scheduling Item Command
Specifies the command to execute.
Max. command length is 35 characters. Only commands from the second column of the
Command Summary are allowed.
*S01C=RDSGEN=0
*S03C=RT2MSG=12
*S04C=
Clears (disables) the command for the item 04.
SxxD
Sc
heduling Item Days
(1
-
7)
Specifies the days for which the item is valid.
Monday = 1.
*S03D=12367
SxxP
Scheduling Item PTY
(0
-
31)
Allows including optional Program Type information so that the Command may be
used for another RDS service
change.
*S03P=15
Sets the PTY to 15 (Other M)
*S04P=
Clears (disables) the PTY option for the item 04.
SxxT
Scheduling Item Times
Specifies the times in 24-hours HH:MM format at which the item command is executed.
Wildcard XX can be used instead of hour number meaning that the item will be executed
each hour in specified minute.
If more items are scheduled for the same time, all these items are executed in
ascending order.
Up to 12 times allowed for each item.
*S03T=XX:30,12:00
xx is in decimal range 01-48