FMUSER INTERNATIONAL GROUP INC. 广州市汉婷生物技术开发有限公司
24
11.2 Basic Commands
AF
Alternative Frequencies
(87.6-107.9)
List of alternative frequencies in MHz representation in range of 87.6-107.9 MHz. Up to 25 items allowed.
AF=103.5,98.0
Sets the alternative frequencies to 103.5 and 98.0 MHz
Stores the AF list into EEPROM
Not allowed (87.5 MHz not defined by RDS standard)
Not allowed (108.0 MHz not defined by RDS standard)
Alternative Frequency Channels
List of alternative frequency channels in hexadecimal representation in range of 01-CC (87.6-107.9 MHz).
Up to 25 items allowed.
Sets the alternative frequencies to 87.6 and 93.4 MHz
Not allowed (87.5 MHz not defined by RDS standard)
Not allowed (108.0 MHz not defined by RDS standard)
Identification of the decoder to be used by the receiver.
DI=1
Standard transmission - stereo.
Standard transmission - automatic stereo/mono set depending on pilot tone presence.
Up to 255 characters long text message to be displayed on receiver instead of static PS name. Primarily
used for song titles streaming etc.
DPS1=Hello World
Sets the DPS1 text
Advanced version of the DPS1 command. Places the text to a one level deep queue. New text will not
be displayed on the receiver until old text reaches its end. Applies only to text length <128 characters.
DPS1ENQ=Hello World Sets the following DPS1 text
Up to 255 characters long text message to be displayed on receiver instead of static PS name.
Alternatively used in conjunction with Messages Commands.
DPS2=Hello World
Sets the DPS2 text
Display mode for the DPS1 text.
0
- Scrolling by 8 characters
1
- Scrolling by 1 character
2
- Word alignment scrolling
Scrolling by 1 character, text separated by spaces at begin and end
Display mode for the DPS2 text.
0
- Scrolling by 8 characters
1
- Scrolling by 1 character
2
- Word alignment scrolling
Scrolling by 1 character, text separated by spaces at begin and end
To Next Page
Loading...