16
3. Using the Clarett+ 2Pre as an on-stage mic pre-amp
The Clarett+ 2Pre automatically stores Focusrite Control settings within the hardware. This feature
lets you configure it as a pair of inputs – mic, line or instrument – for use as a stand-alone device.
This allows you to use it on stage in a live environment where no computer connection is needed, for
example.
In the example illustrated, a mic and a guitar are connected to the Clarett+ 2Pre’s inputs; Outputs
1 and 2 go to the main PA system. The performer can adjust the mic and guitar volume separately
from the front panel.
To Next Page
Loading...
