Focusrite Clarett+ 2Pre - Physical and Electrical Characteristics

19
Impedance 2.3M �
Line and Monitor Outputs
Frequency Response
20 Hz – 20 kHz, +/-<0.02 dB;
20 Hz – 35 kHz, +/-<0.02 dB
Dynamic Range Outputs (1-2) 124 dB (A-Weighted)
THD+N Outputs (1-2) -106 dB
Maximum Output Level (0 dBFS)
Balanced Line/TRS Outputs
18 dBu
Impedance 68 �
Headphone Outputs
Frequency Response
20 Hz – 20 kHz, +/-<0.06 dB;
20 Hz – 35 kHz, +/-<0.07 dB
Dynamic Range 118 dB (A-Weighted)
THD+N -104 dB
Maximum Output Level 16 dBu
Impedance 5 �
Physical and Electrical Characteristics
Analogue Inputs
Connectors Combo XLR sockets: Mic/Line/Inst, on front panel
Mic/Line switching Automatic
Line/Instrument switching via Focusrite Control
Phantom power +48 V switches for each input
Analogue Outputs
Main outputs 4 x balanced ¼” TRS jacks on rear panel
Stereo headphone output ¼” TRS jack on front panel
Main monitor output level control
On front panel
Headphones level control
Other I/O
ADAT INPUT
TOSLINK optical connector:
8 channels at 44.1/48 kHz
4 channels at 88.2/96 kHz
USB 1 x USB 2.0 using Type C connector
MIDI INPUT 2 x 5-pin DIN sockets
Weight and Dimensions
W x D x H 210 mm x 161 mm x 55 mm / 8.27” x 6.34” x 2.17”
Weight 1.11 kg (2.45 lb)