Focusrite Clarett+ 2Pre - Clarett+ 2 Pre Technical Specifications; Performance Specifications

18
CLARETT+ 2PRE TECHNICAL SPECIFICATIONS
Performance Specifications
Where possible, specifications are measured to AES17. Unless stated, all specification measurements
are unweighted.
Configuration
Inputs 10: analogue (2), ADAT (8)
Outputs 4: analogue
Mixer Fully assignable 14-in/4-out mixer
Custom mixes 10 mono
Maximum custom mix inputs 18 mono
Digital Performance
Supported sample rates 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
Microphone Inputs
Frequency Response
20 Hz – 20 kHz, +/-<0.03 dB;
20 Hz – 35 kHz, +/-<0.15 dB
Dynamic Range 118 dB at minimum gain (A-Weighted)
THD+N -110 dB @ -1 dBFS and 20 dB gain (A-Weighted)
Noise EIN -129 dBu
Maximum input level 18 dBu
Gain Range 57 dB
Impedance
AIR off: 6.2K �
AIR on: 2.2K �
Line Inputs
Frequency Response
20 Hz – 20 kHz, +/-<0.05 dB;
20 Hz – 35 kHz, +/-<0.15 dB
Dynamic Range 118 dB at minimum gain (A-Weighted)
THD+N -100 dB @ -1 dBFS and minimum gain
Maximum input level 26 dBu
Gain Range 57 dB
Impedance 66K �
Instrument Inputs
Frequency Response
20 Hz – 20 kHz, +/-<0.04 dB;
20 Hz – 35 kHz, +/-<0.15 dB
Dynamic Range 116 dB (A-Weighted)
THD+N -96.5 dB @ -1 dBFS and minimum gain
Maximum input level 15 dBu
Gain Range 57 dB