4 Control 2802 Logic Pro Automation & Control Surface Manual
Control Surface (DAW Control) Overview
Control Surface (DAW Control) Overview
Dual Layer Fader Strips
The 8 Fader Strips (faders, SEL, CUT & SOLO) ip between
controlling analogue channel levels and track faders within the
DAW. This dual-layer technology makes it easy to switch from
analogue to DAW control in an instant.
When working in the DAW layer, the console remotely
adjusts parameters within the DAW software via an Ethernet
connection (using the HUI
TM
control surface protocol).
Any 8 DAW tracks may be adjusted from the console’s Fader
Strips.
Each of the 8 channel faders is motorised, and both the
analogue and DAW layers can be fully automated.
Control Surface Panel
The layer switching, and other DAW parameters, such as auxes, plug-ins, transport and automation, are controlled from Control
Surface Centre Section - this includes a jog/shuttle wheel, transport buttons, 4 rotary encoders and OLED channel displays.
To Next Page
Loading...
Need help?
General
