EasyManua.ls Logo

Fora DM40 - Obtaining a Blood Sample from Alternative Sites

Fora DM40
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEVER try to add more blood samples to the test
strip after the blood absorption process has been
completed. Discard the used test strip and retest
with a new one.
● If you are experiencing trouble with lling the
conrmation window, please contact your health
care professional or the local customer service for
more assistance.
5. Read Your Result
The result of your blood glucose test will appear
after the meter shows the “Processing” message.
The blood glucose result will be stored in the
memory automatically.
An example:
(68 mg/dL = 3.7 mmol/L)
6. Pull out the used test strip
Pull out the used test strip. Use a sharp bin to
dispose of used test strips.
Always follow the instructions in the lancing device
insert when removing the lancet.
WARNING:
The used lancet and test strip may be bio
hazardous. Please discard them carefully according
to your local regulations.
Obtaining a Blood Sample from
Alternative Sites
You can test on a variety of locations on your body.
Important: There are limitations with AST
(Alternative Site Testing).
Please consult your health care professional before
you perform AST.

Related product manuals