11. Brake status
indicator
This icon will
illuminate if the
emergency brake
handle is not fully
released, or if the brake fluid level is low. It will
also flash while the park brake reminder is
sounding.
12. Electrical leakage
warning indicator
This icon will
illuminate to warn
that there is electrical
“leakage” or short
circuit to the vehicle frame. If the vehicle is wet
or has recently been washed, allow the vehicle to
fully dry and recheck for the indicator. If the
indicator is still present, take your vehicle to an
authorized TH!NK Dealer to correct the condition.
To avoid serious injury and/or death, never
perform any vehicle service or maintenance
while the electrical leakage warning indicator is
illuminated.
This vehicle contains a high voltage
electrical system. Serious injury, death,
and/or property damage may result if this vehicle
is not properly used, charged or serviced as stated
in this manual. Read this owner’s guide prior to
use, charging, or servicing this vehicle. Do not
drill, cut, or modify any part of this vehicle, as
high voltage wiring is present. Do not use jumper
cables. Only charge this vehicle with an approved
GFCI cord as stated in Battery charging.
Instrumentation
10
To Next Page
Loading...
Need help?
General