Each seating position in your vehicle has a
specific safety belt assembly which is made
up of one buckle and one tongue that are designed
to be used as a pair. 1) Use the shoulder belt on
the outside shoulder only. Never wear the shoulder
belt under the arm. 2) Never swing the safety belt
around your neck over the inside shoulder. 3)
Never use a single belt for more than one person.
Combination lap and shoulder belts
1. Insert the
belt tongue into
the proper
buckle (the
buckle closest
to the direction
the tongue is
coming from)
until you hear a
snap and feel it
latch. Make
sure the tongue
is securely
fastened in the
buckle.
2. To unfasten,
push the
release button
on the buckle
and pull the
tongue out of
the buckle.
Seating and safety restraints
47
To Next Page
Loading...
Need help?
General