Ford 2002 Think - Replacing Specific Light Bulbs

Replacing the front turn signals
1. Remove the
scrivet and cowl
tray panel.
(Driver side
shown; the
passenger side
is similar.)
2. Twist counterclockwise and remove the front turn
signal bulb retainer.
3. Remove the bulb.
4. Install the new bulb.
5. Install the removed
components.
Replacing the rear high-mount stop and reverse
lamp bulbs
1. Remove the
two screws and
pull out the
lamp assembly
to expose the
bulb sockets on
the back.
Lights
19