5. Inside each
cell opening is a
slotted cup
protruding
down into the
battery cell. If
battery fluid is
visible in the
slotted cup,
reinstall the
cap. If no fluid
is visible in the
slotted cup in
the battery cell,
carefully add
demineralized
water or
distilled water
until the battery
fluid level
reaches 1/8”
from the
bottom of the slotted cup. Do not overfill.
6. When you have completed adding water, make
sure each battery cell cap is securely installed. Wipe
any spilled water off the top of the battery.
7. Reinstall the body component(s) in reverse order
of removal and tighten the bolts securely.
Maintenance-free type batteries
If your vehicle is equipped with maintenance-free
batteries, it does not require additional water during
its life of service. Removing the caps could void the
battery warranty.
BRAKE FLUID
The brake fluid switch will illuminate the brake icon
on the gauge if the brake fluid falls below a safe
level.
Maintenance and specifications
88
To Next Page
Loading...
Need help?
General