3. From both
sides of the
vehicle, remove
the two push
pins. (Driver
side shown;
passenger side
similar)
4. From both
sides of the
vehicle, remove
four bolts from
beside the seat
frame. (Driver
side shown;
passenger side
is similar.)
Do not touch the battery terminals with
your hands or a metal object. Also, do not
lay any tools on the batteries and never connect
one battery terminal with another with any tool or
metal object laid across the top of the battery.
This vehicle contains a high voltage
electrical system. Serious injury, death,
and/or property damage may result if this vehicle
is not properly used, charged or serviced as stated
in this manual. Read this owner’s guide prior to
use, charging, or servicing this vehicle. Do not
drill, cut, or modify any part of this vehicle, as
high voltage wiring is present. Do not use jumper
cables. Only charge this vehicle with an approved
GFCI cord as stated in Battery charging.
Maintenance and specifications
87
To Next Page
Loading...
Need help?
General