5. Push and
squeeze the two
bulb retainer
wires to
disengage them
from the
headlamp
housing.
Remove the
headlamp bulb.
To install the headlamp bulb:
Handle the halogen headlamp bulb carefully
and keep out of the children’s reach. Grasp
the bulb only by its metal base and do not touch
the glass. The oil from your hand could cause the
bulb to break the next time the headlamps are
operated.
1. Install the
headlamp bulb.
Squeeze and
push the two
bulb retainer
wires to engage
them to the
headlamp
housing.
2. Push the flat
connector
attached to the
white wire into
the headlamp
bulb shield.
Lights
17
To Next Page
Loading...