3. Remove the
three screws
and the rear
turn signal
assembly.
4. Connect the
electrical
connector and
install the new
lamp assembly.
5. Tighten the screws firmly, but do not over-tighten.
6. Install and lock the decklid.
Using the right bulbs
Replacement bulbs are specified in the chart below.
Function Number of bulbs Trade number
Headlamp 2 H3
Backup lamp 2 906
License plate lamp 1 W5W
High-mount stop lamp 1 922
Turn signal lamp 4 7507/PY21W
All replacement bulbs are clear in color except where
noted.
To replace all instrument panel lights - see your Dealer.
Lights
22