3. Remove and
rinse the
cleaning
brushes.
4. Rinse out any dirt or remaining soap.
5. Install the cleaning brushes.
6. Install the front and rear rubber plugs.
7. Fill with a water and soap solution.
8. Install the cover and screws. Tighten the screws,
but do not overtighten.
COOLER (IF EQUIPPED)
The cooler is a
removable
folding soft
cooler. On
4-passenger
neighbors, the
cooler is located
under the rear
seat. On
2-passenger
neighbors, the
cooler is located in the storage tray.
Driver controls
32
To Next Page
Loading...