The optional LATCH equipped passenger seat is
equipped with built-in tether strap anchors located
behind the seat as described below.
The tether anchor (if equipped) in your vehicle is
located at the bottom of the front passenger
seatback.
Attach the tether strap only to the
appropriate tether anchor as shown. The
tether strap may not work properly if attached
somewhere other than the correct tether anchor.
1. Position the
child safety seat
on the seat
cushion.
2. Route the
child safety seat
tether strap
over the back of
the seat and
between the
head restraint
posts.
Seating and safety restraints
56
To Next Page
Loading...