2-Door
Pull the strap to fold the head restraint
rearward.
REMOVING THE HEAD RESTRAINT
1. Pull up the head restraint until it
reaches its highest position.
2. Press and hold the adjust and release
button and the unlock and remove
button.
3. Pull up the head restraint.
Note: The head restraints are not
removable on 2-door vehicles.
INSTALLING THE HEAD
RESTRAINT
Align the steel stems into the guide sleeves
and push the head restraint down until it
locks.
ADJUSTING THE SEAT BACKREST
WARNING: Do not place cargo or
any objects behind the seat backrest
before returning it to the original position.
Pull on the seat backrest to make sure
that it has fully latched after returning
the seat backrest to its original position.
An unlatched seat may become
dangerous if you stop suddenly or have
a crash.
Note: The rear seats are not adjustable on
2-door vehicles.
4-Door
Pull the lever up to fold the seat backrest
fully forward.
Note: Make sure that the area under the
seat is free of objects before folding the
backrest.
To return the seat backrest to the upright
position, rotate it up until it locks.
Note: To store the removable doors, the
seat backrest must be in the upright
position.
To recline the seat backrest to the optimal
seating position, pull the lever up and push
the backrest rearward.
FOLDING THE SEATS
WARNING: Do not drive your
vehicle with a seat that is unlatched or
in the folded position. Failure to follow
this instruction could result in personal
injury or death in the event of a sudden
stop or crash.
WARNING: Do not adjust a seat or
release a seat floor latch when the
vehicle is moving. Failure to follow this
instruction could result in personal injury
or death in a sudden stop or crash.
134
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Rear Seats
To Next Page
Loading...
