Ford Bronco 2021 - Storing the Doors and the Roof Panels - 4-Door

Note: Push pins and quarter pins should
not be removed from fender flare.
Installing the Fender Flares
E334101
1. Press the five push clips in until they
are seated.
E342192
2. Lock the five quarter turn clips by
turning the clips clockwise.
STORING THE DOORS AND
THE ROOF PANELS - 4-DOOR
(IF EQUIPPED)
WARNING: Do not store removed
doors or roof panels in vehicle without
using the Ford onboard storage kit, and
verifying they have been secured per
instructions. Failure to follow this
instruction could result in personal injury
or death.
Note: Cargo can shift under severe vehicle
use, to reduce the risk of damage, avoid high
speed or extreme rock crawl off-road
situations when storing the doors in the
cargo area.
Note: Inspect the bags and harness
periodically to make sure they are not
damaged. Inspect the door retention
harness straps to make sure there are no
nicks, tears or cuts. Replace if necessary.
Note: Clean the roof panels and doors prior
to storing them in the bags as dirt may
damage the finish.
Storing the Front Roof Panels
1. Remove the front roof panels. See
Removing and Installing the Front
Roof Panel (page 343).
352
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Removable Vehicle Components