Ford Bronco 2021 - Removable Doors

REMOVABLE DOORS
REMOVING AND INSTALLING THE
DOORS
Removing the Doors
WARNING: Removal of doors for
off-road use only. Removing the doors
from the vehicle will affect protection
provided by the doors and may affect
safety system performance, including
safety canopy and front seat mounted
side airbags, during a crash or rollover.
WARNING: Vehicle needs to be
turned off before reconnecting doors to
verify all electrical connections have
been properly connected. Failure to
follow these instructions may affect
safety system performance, including
safety canopy and front seat mounted
side airbags, during a crash or rollover.
1. Fully open the windows on the doors
you are removing.
2. Switch your vehicle off.
3. Fold the mirrors toward the front of
your vehicle before removing the front
doors.
4. Fully open the door you are removing.
E347602
5. Locate the fender protector in the tool
pouch and install it over the fender
edge near the top door hinge.
E328722
6. To release the door harness connector,
open the connector door. Pull the
connector straight out.
E328724
7. Make sure to seat the connector door
in the closed position.
8. We recommend that you use a door
storage bag on the door you are
removing.
Note: Make sure you fully secure the bag.
Make sure the bag contains the edge and
corners of the door to prevent accidental
door damage before proceeding with the
removal of the door.
339
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Removable Vehicle Components