1. Check the system for any visual leaks
before continuing.
2. Make sure the clutch pedal is in the
most upward position.
3. Remove the cap and diaphragm and
inspect the fluid level. To avoid
contamination, make sure the reservoir
cap remains in place and fully
tightened unless you are checking the
fluid level.
4. Reinstall the reservoir cap and
diaphragm.
Only use fluid that meets our
specifications. See Capacities and
Specifications (page 393).
Note: A fluid level on the step line in the
reservoir is within the normal operating
range and there is no need to add fluid. A
fluid level not in the normal operating range
could compromise the performance of the
system. Have your vehicle checked
immediately.
MANUAL TRANSMISSION
FLUID CAPACITY AND
SPECIFICATION
See Manual Transmission Fluid
Capacity and Specification (page 403).
CLUTCH FLUID CAPACITY AND
SPECIFICATION
See Capacities and Specifications
(page 393).
176
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Manual Transmission