Ford Bronco 2021 - Stabilizer Bar Disconnect Indicators; Stabilizer Bar Disconnect - Troubleshooting

Switching the Stabilizer Bar
Disconnect Off
Switch the system off by pressing the
stabilizer bar disconnect button, which
reconnects the stabilizer bar if currently
disconnected.
The stabilizer bar disconnect system also
turns off when:
• The engine is switched off.
• You switch out of four-wheel drive low
or four-wheel drive high.
• You select a drive mode that does not
allow the stabilizer bar to disconnect.
Note: The stabilizer bar can be reconnected
at any time, it is not necessary for the vehicle
to be on a level surface as the stabilizer bar
self-aligns.
STABILIZER BAR DISCONNECT
INDICATORS
E329476
An indicator illuminates when
you switch the stabilizer bar
disconnect system on. The color
of the indicator changes to indicate the
system status.
Amber indicates that the stabilizer bar is
disconnected.
Grey indicates that the stabilizer bar is
connected and in standby.
Red indicates that there is a fault with the
system, have the system checked as soon
as possible.
STABILIZER BAR DISCONNECT
– TROUBLESHOOTING
STABILIZER BAR DISCONNECT –
INFORMATION MESSAGES
ActionMessage
The selected drive
mode does not
allow you to turn on
the stabilizer bar
disconnect feature.
See G.O.A.T.
Mode Control
(page 242).
Sta-Bar Disconnect
Not Available In
Selected Drive
Mode
The stabilizer bar
has been discon-
nected.
Sta-Bar Discon-
nected Sta-Bar
Reconnects over 20
MPH
Sta-Bar Discon-
nected Sta-Bar
Reconnects over 32
km/h
The stabilizer bar
disconnect is avail-
able below 20 mph
(32 km/h).
Sta-Bar Disconnect
Available Below 20
MPH
Sta-Bar Disconnect
Available Below 32
km/h
The selected 4WD
mode does not
allow you to turn on
the stabilizer bar
disconnect feature.
Sta-Bar Disconnect
Available in 4L or
4H
215
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Stabilizer Bar Disconnect (If Equipped)