Ford Bronco 2021 - Checking the Wiper Blades; Replacing the Front Wiper Blades

CHECKING THE WIPER
BLADES
E142463
Run the tip of your fingers over the edge of
the blade to check for roughness.
REPLACING THE FRONT
WIPER BLADES
E165804
1. Pull the wiper blade and arm away
from the glass.
Note: Do not hold the wiper blade to lift the
wiper arm.
E327597
2
2. Lift the wiper blade primary locking clip.
E327598
3. Press the wiper blade secondary
locking clip.
4. Remove the wiper blade.
Note: Make sure that the wiper arm does
not spring back against the glass when the
wiper blade is not attached.
5. To install, reverse the removal
procedure.
Note: Make sure that the wiper blade locks
into place.
91
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Wipers and Washers