Ford Bronco 2021 - Degree Camera Settings

The fixed and active guide lines fade in and
out depending on the steering wheel
position. The active guide lines do not
display when the steering wheel position
is straight.
Objects in the red zone are closest to your
vehicle and objects in the green zone are
farther away. Objects get closer to your
vehicle as they move from the green zone
to the yellow or red zones. Use the side
view mirrors and rear view mirror to get
better coverage on both sides and rear of
your vehicle.
Keep Out Zone
E310341
The Keep Out Zone is represented by the
yellow dotted lines running parallel to your
vehicle.
360 DEGREE CAMERA
SETTINGS
SWITCHING THE 360 DEGREE
CAMERA ON AND OFF
E332186
The 360 degree camera system
button is on the instrument
panel and allows you to toggle
through different camera views. The front
and rear cameras have multiple screens
which consist of:
• Normal view.
• Normal view with 360.
• Split view.
Note: The rear view camera activates when
you switch into reverse (R). Additional views
are then accessible on the touchscreen.
When in park (P), neutral (N) or drive (D),
only the front images display when you
press the button. When in reverse (R), only
the rear images display when you press the
button.
Note: The 360 degree camera system turns
off when your vehicle is in motion at low
speed, except when in reverse (R).
SWITCHING THE 360 DEGREE
CAMERA VIEW
E224483
Press to access the different
camera views.
E224783
Normal + 360 view: Contains
the normal camera view next to
a 360 degree camera view.
E224784
Normal view: Provides an
image of what is directly in front
of or behind your vehicle.
E224785
Split view: Provides an
extended view of what is in front
of or behind your vehicle.
E224485
Zooms in on the image.
231
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
360 Degree Camera (If Equipped)