If the electronic locking differential is
selected and the indicator in the cluster
does not turn on, one of the following has
occurred:
• The electronic locking differential is not
allowed in the current drive mode and
is accompanied by SELECTED
LOCKING DIFFERENTIAL NOT
AVAILABLE IN CURRENT DRIVE MODE
in the information display.
• The electronic locking differential is not
allowed in the current 4x4 mode and
is accompanied by SELECTED
LOCKING DIFFERENTIAL NOT
AVAILABLE IN CURRENT 4x4 MODE in
the information display.
• The system has malfunctioned and is
accompanied by CHECK LOCKING
DIFFERENTIAL in the information
display. See your authorized dealer for
assistance.
ELECTRONIC LOCKING DIFFERENTIAL – TROUBLESHOOTING
ELECTRONIC LOCKING DIFFERENTIAL – INFORMATION MESSAGES
DetailsMessage
The selected electronic locking differential is not available
in current drive mode. See G.O.A.T. Mode Control (page
242).
Selected Locking Differen-
tial Not Available in
Current Drive Mode
The selected electronic locking differential is not available
in your current four-wheel drive mode. See G.O.A.T. Mode
Control (page 242).
Selected Locking Differen-
tial Not Available in
Current 4x4 Mode
The selected electronic locking differential requires that you
release the accelerator pedal in order to engage.
To Engage Locking
Differential Release
Accelerator Pedal
An electronic locking differential system fault is present. See
your authorized dealer as soon as possible.
Check Locking Differen-
tial
The following conditions affect the
electronic locking differential:
192
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Electronic Locking Differential (If Equipped)
To Next Page
Loading...
