CHARGING A WIRELESS
DEVICE
Place the device on the center of the
charging surface with the charging side
down. The charging stops after your device
reaches a full charge.
You can use the charger when the vehicle
is in accessory mode, when the vehicle is
running, or when SYNC is on.
Displays on the status bar when
wireless charging is in progress.
Note: The charging performance may be
affected if your device is in a case. It may be
necessary to remove the case to wirelessly
charge your device.
Note: Software and firmware updates may
affect device compatibility, including the
use of unofficial software or firmware.
Customers should verify charging
functionality with their specific devices
in-vehicle.
WIRELESS ACCESSORY CHARGER – TROUBLESHOOTING
WIRELESS ACCESSORY CHARGER – INFORMATION MESSAGES
DescriptionBehaviorMessage
The system stops charging
your device if the system
detects the phone is
misaligned, or a foreign
metal object is on the char-
ging surface.
Pop-up window.
Phone misaligned or object
between phone and charger
detected. Correct the condi-
tion to resume charging.
148
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Wireless Accessory Charger (If Equipped)
To Next Page
Loading...
