ActionMessage
Stabilizer bar
disconnect is not
available. See
Stabilizer Bar
Disconnect –
Frequently Asked
Questions (page
216).
Sta-Bar Disconnect
Not Available See
Manual
Stabilizer bar
disconnect fault
detected, drive
below 20 mph
(32 km/h). Have
your vehicle
checked by an
authorized dealer
as soon as possible.
Sta-Bar Disconnect
Drive Below 32
km/h Service Now
Sta-Bar Disconnect
Drive Below 20
MPH Service Now
STABILIZER BAR DISCONNECT –
FREQUENTLY ASKED QUESTIONS
Why is the stabilizer bar disconnect not
disconnecting?
The engine is turned off and needs to
be turned on.
Why is the stabilizer bar disconnect not
disconnecting?
The vehicle is not in four-wheel drive
low or four-wheel drive high, and
needs to be switched to either mode.
Why is the stabilizer bar disconnect not
disconnecting?
Vehicle speed is above 20 mph
(32 km/h) and needs to be reduced in
order for the stabilizer bar to
disconnect.
Why is the stabilizer bar disconnect not
disconnecting?
The vehicle is on a very significant
lateral incline, and needs to be moved
to more level ground.
Why is the stabilizer bar disconnect not
disconnecting?
The vehicle's battery charge is low and
needs to be changed or charged.
Why is the stabilizer bar disconnect not
disconnecting?
There is a fault active in another
system on the vehicle, have the system
checked as soon as possible.
Why is the stabilizer bar disconnect not
disconnecting?
The vehicle is in a drive mode that
does not allow the stabilizer bar to
disconnect and needs to be switched
to a different drive more.
216
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Stabilizer Bar Disconnect (If Equipped)
To Next Page
Loading...
