2. Open the bag and pull out the divider.
Place the first panel into the bag.
Replace the divider before placing the
second panel into the bag.
3. Zip the bag closed.
4. Gently slide the roof panel bag into the
cargo area.
Securing the Front Roof Panels
Vertically
1. Raise the bag to the vertical position.
2. Secure the upper roof bag strap around
the rear seat headrests. Adjust the
tension on the strap until it is snug.
Note: Do not over-tighten the strap. This
may cause damage to the headrest.
3. Secure the lower bag hooks to the
forward cargo rings.
Note: Some vehicle accessories may
prevent vertical storage of the panels.
353
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Removable Vehicle Components
To Next Page
Loading...
