1. Install the loops through the two
D-rings and secure the panels.
Note: Do not place objects on the roof
panel bag to avoid damaging the panels.
Securing the Door Retention
Harness
2. Use the ratchet tool provided in the kit
to assist in tightening the eyebolts. The
eyebolts should rest in the groove of
the handle. Using the tool as a lever,
apply force until fully tightened.
354
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Removable Vehicle Components
To Next Page
Loading...
