ROUTE GUIDANCE SETTINGS
Avoid 4x4 Roads
Before Starting a Navigation Session
Before starting a navigation session you
can enable and disable 4x4 roads using
the controls on the point of interest detail
page. When enabled the system will
include 4x4 roads when determining the
best route. When disabled the system will
avoid 4x4 roads.
During a Navigation Session
If you do not wish to have your route take
you on 4x4 roads you can remove the turn
onto the 4x4 road using the turn list.
1. Tap the chevron below the turn panel.
2. Swipe to the left on the 4x4 road on
the turn list that appears.
3. Press the delete button to remove that
road from your route.
The system will then re-route you to your
destination.
CANCELING ROUTE GUIDANCE
Press the button to cancel route
guidance to the selected
location.
442
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Navigation
To Next Page
Loading...
