Normal Maintenance Intervals
At Every Oil Change Interval as Indicated by the Information Display
1
Change the engine oil and filter.
2
Rotate the tires, inspect tire wear and measure the tread depth.
Perform a multi-point inspection, recommended.
Inspect the automatic transmission fluid level, if applicable with dipstick. Consult your
dealer for requirements.
Inspect the brake pads, shoes, rotors, drums, brake linings, hoses and the parking brake.
Inspect the engine coolant system strength and hoses.
Inspect the exhaust system and heat shields.
Inspect the front axle and U-joints. Lubricate grease fittings in applicable.
Inspect the half-shaft boots.
Inspect the steering linkage, ball joints, suspension, tire-rod ends, driveshaft and the U-
joints. Lubricate any areas with grease fittings.
Inspect the wheels and related components for abnormal noise, wear, looseness or
drag.
1
Do not exceed one year or 10,000 mi (16,000 km) between service intervals.
2
Reset the oil change reminder after engine oil and filter changes. See Resetting the
Engine Oil Change Reminder (page 322).
Brake Fluid Maintenance
1
Change the brake fluid.
2
Every three Years
1
Perform this maintenance item every three years. Do not exceed the designated time
for the interval.
2
Brake fluid servicing requires special equipment available at your authorized dealer.
456
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Scheduled Maintenance
To Next Page
Loading...
