Vehicles with Manual
Transmission (If Equipped)
Blind spot information system turns on
when all the following occur:
• You start your vehicle.
• The vehicle speed is greater than
6 mph (10 km/h).
Note: The system does not operate in
reverse (R).
SWITCHING BLIND SPOT
INFORMATION SYSTEM ON
AND OFF
1.
Press the button on the
touchscreen.
2. Press Driver Assistance.
3. Switch Blind Spot Information
System on or off.
When you switch blind spot information
system off, a warning lamp illuminates.
When you switch the system on or off, the
alert indicators flash twice.
Note: The system remembers the last
setting when you start your vehicle.
LOCATING THE BLIND SPOT
INFORMATION SYSTEM
SENSORS
The sensors are inside the brake lamp on
both sides of your vehicle.
Note: Keep the sensors free from snow, ice
and large accumulations of dirt.
Note: Do not cover the sensors with bumper
stickers, repair compound or other objects.
Note: Bike and cargo racks could cause
false alerts due to obstruction of the sensor.
We recommend switching the feature off
when using a bike or cargo rack.
Note: Blocked sensors may affect system
accuracy.
If the sensors become blocked, a message
appears in the instrument cluster display.
See Blind Spot Information System –
Information Messages (page 306). The
alert indicators illuminate but the system
does not alert you.
302
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Blind Spot Information System (If Equipped)
To Next Page
Loading...
Need help?
General
