Formlabs Form 4B - Page 16

12
The Form4B requires an operating environment that is low in ambient humidity
and static electricity. Due to the sensitive nature of its components and the printing
mediums, system reliability and print quality may fluctuate if the ambient temperature
and moisture are outside the recommended ranges. Refer to section 4.1 Location and
environs for the recommended operating environs.
3.1.2 Sharp tools
Cutting hazard: Using sharp tools on slippery surfaces (such as a resin-coated build
platform) can result in sudden movement. Orient sharp tools away from yourself,
especially when cutting or scraping.
The accessories include sharp tools such as: a removal tool, flush cutters, and a plastic
tank scraper.
3.1.3 Resin
Poison hazard: Never ingest resin in liquid or solid form. If swallowed, immediately
call a poison center or medical professional. Contact Chemtrec at +1 800 424 9300
for global 24-hour emergency assistance.
Refer to the safety data sheet (SDS) and local authorities for guidance on disposing
of resin and solvent. Liquid resin (whether pure liquid, dissolved in solvent, or partially
cured) may be classified as hazardous waste in your region and shall be disposed of
with care.
ENVIRONMENTAL HAZARD:
Uncured photopolymer resin is classified as hazardous to aquatic life.
Consult the safety data sheet (SDS) as the primary source of information to
understand safety and handling of Formlabs materials. Respect Formlabs resin like
any household chemical. Follow standard chemical safety procedures andFormlabs
resin handling instructions. In general, Formlabs resin is not approved for use with
food, drink, or medical applications on the human body. However, Formlabs resins
for biocompatible applications are biologically safe for specific types and lengths of
exposure to the human body. Refer to the safety data sheet (SDS) for each specific
resin as well as support.formlabs.com for more detail.
3.1.4 Radio interference
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to CFR Title 47, Part 15 of FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
NOTICE
CAUTION
WARNING
CAUTION
NOTICE