Safety | 13
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference, in which case the user will be required to correct
the interference at their own expense.
Changes or modifications to this product not authorized by Formlabs could void the
electromagnetic compatibility (EMC) and wireless compliance and negate your authority to
operate the product.
This product has demonstrated EMC compliance under conditions that included the use
of compliant peripheral devices and shielded cables between system components. It is
important that you use compliant peripheral devices and shielded cables between system
components to reduce the possibility of causing interference to radios, televisions, and other
electronic devices.
3.1.5 Isopropyl alcohol (IPA)
Fire hazard: Isopropyl alcohol is a flammable chemical. Keep away from ignition
sources, including open flames, sparks or concentrated sources of heat.
Formlabs does not manufacture isopropyl alcohol. Consult the chemical manufacturer
or supplier for detailed safety information. Carefully follow the safety instructions
provided with the isopropyl alcohol that you purchase. Isopropyl alcohol can be
flammable, even explosive, and should be kept away from heat, fire, or sparks. Any
containers holding isopropyl alcohol should be kept closed or covered when not in
use. We also recommend that you wear protective gloves and have good ventilation
when working with isopropyl alcohol.
3.1.6 Tripropylene glycol monomethyl ether (TPM)
Formlabs does not manufacture tripropylene glycol monomethyl ether. Consult the
chemical manufacturer or supplier for detailed safety information. Carefully follow
the safety instructions provided with the tripropylene glycol monomethyl ether you
purchase. We also recommend that you wear protective gloves when working with
tripropylene glycol monomethyl ether.
3.2 Personal protective equipment (PPE)
Safe operation of the Form4B can be achieved by implementing the following equipment:
• Non-reactive nitrile gloves
• Safety glasses
Skin irritant: Resin and solvent may cause skin irritation or an allergic skin reaction.
Wear gloves when handling liquid resin, resin-coated surfaces, or solvent. Wash skin
with plenty of soap and water.
DANGER
NOTICE
NOTICE
WARNING
To Next Page
Loading...
