Formlabs Form 4B - Page 21

Preparation and setup | 17
Printer Finish Kit
Resin
cartridge Resin tank
Build
platform Mixer
Shipping
dimensions
52.3 × 55 ×
71.4 cm
(20.6 × 21.7
× 28.1 in)
48.0 × 32.0
× 28.0 cm
(18.9 × 12.6
× 11.0 in)
8.9 × 10.2 ×
28.6 cm
(3.5 × 4.0 ×
11.3 in)
41.3 × 40.0
× 8.7 cm
(16.3 × 15.7 ×
3.4 in)
24.0 × 15.0
× 10.0 cm
(9.4 × 6.2 ×
3.9 in)
28.0 × 12.5
× 3.9 cm
(11 × 4.9 ×
1.5 in)
Shipping
weight
22.6 kg
(50 lb)
3.4 kg
(7.5 lb)
1.5 kg
(3.3 lb)
0.9 kg
(1.9 lb)
1 kg
(2.2 lb)
0.1 kg
(0.2 lb)
4.3.2 Unboxing the Form4B
The custom packaging the Form4B arrives in is specially designed to protect the machine
during shipping. During unboxing, inspect the product for any damage or missing items. In the
case of damage or missing items, contact Formlabs Support or a certified service provider.
To unbox the printer:
1. Position the Form4B’s packaging near the designated location, leaving enough room for
two people to comfortably maneuver throughout the area. Stand the Form4B’s packaging
upright to ensure it is level.
2. Cut the shipping straps securing the printer box.
3. Lift the outer box o the printer.
4. Remove the power cable and accessories box from on top of the printer.
5. Remove the top protective foam from the printer.
6. With the printer still in the lower box, lift the lower box by its handles and place it on your
work surface.
7. Lift the printer out of its packaging.
8. Lift the printer by its base and place the printer on a flat, leveled surface.
9. Remove the microfiber shipping cover from the printer.
10.
Remove any additional wrapping and packaging from outside of the printer before
connecting the machine to power.
Save the Form4B’s packaging including any inserts for transporting the machine.
Original packaging is required for warranty service and designed to be kept and
reused for transportation or shipping.
NOTICE