24
5. Place the upright printer into the lower box. The bottom foam inserts are shaped to match
the contours of the printer. Ensure that the printer sits snugly in the foam inserts.
6. Place the upper foam on top of the printer. The foam should fit exactly around the top of
the printer’s cover.
7. Lower the outer box onto the printer and lower box, making sure that the printer and foam
packaging fit entirely within the box. Orient the outer box and lower box so the hand holes
match up when packaged.
8. Seal the edges of all box openings with adhesive packing tape. Use reinforced packing
tape and tape all box seams, across all open corners, and from each side across the bottom
to ensure that your printer is not damaged during shipping.
To Next Page
Loading...
