FortiGate-200A, FortiGate-300A, FortiGate-400A, and FortiGate-500A FortiOS 3.0 MR4 Install Guide
28 01-30004-0268-20070712
Factory defaults
Table 8: Factory default NAT/Route mode network configuration
Factory default Transparent mode network configuration
In Transparent mode, the FortiGate unit has the default network configuration
listed in Table 9.
Table 9: Factory default Transparent mode network configuration
Administrator
account
User name: admin
Password: (none)
Port 1
IP: 192.168.1.99
Netmask: 255.255.255.0
Administrative Access: HTTPS, Ping
Port 2
WAN1 (200A)
IP: 192.168.100.99
Netmask: 255.255.255.0
Administrative Access: Ping
Port 4
DMZ (200A)
IP: 10.10.10.1
Netmask: 255.255.255.0
Administrative Access: HTTPS, Ping
Default gateway (for default route) 192.168.100.1
Network settings Default Route
A default route consists of a default gateway and the name of
the interface connected to the external network (usually the
Internet). The default gateway directs all non-local traffic to this
interface and the external network.
Primary DNS Server 65.39.139.53
Secondary DNS Server 65.39.139.63
Administrator
account
User name: admin
Password: (none)
Management IP
IP: 0.0.0.0
Netmask: 0.0.0.0
DNS
Primary DNS Server: 65.39.139.53
Secondary DNS Server: 65.39.139.63
Administrative access
Port 1 HTTPS, Ping
Port 4 Ping
DMZ HTTPS, Ping
WAN1 Ping
To Next Page
Loading...
