System Configurations Administration
Function Page File Name
[Service > DNS Proxy] dnsproxy.txt
[Service > Tunnel Routing] tunnel-routing.txt
[Log > Control] log-control.txt (This file includes Mail/FTP passwords.)
[Log > Notification] notification.txt (This file includes email/password)
[Log > Link Report] link-report.txt
Maintenance
Click [Factory Default] to reset configurations to factory default. Or you can perform “resetconfig” command in
console. Click [Reboot] to reboot FortiWAN. For information on console command, please refer to Console Mode
Commands.
Web UI Port
Type the port number in [New Port] and then click [Setport]. Enter the new port number when you log in again into
Web UI. Additionally, the new port shall avoid conflict with FortiWAN reserved ports when configuring the port.
Otherwise, FortiWAN will display error message of port settings failure and resume to the correct port number that was
configured last time.
Port Service Port Service Port Service
1 tcpmux 102 iso-tsap 530 courier
7 echo 103 gppitnp 531 Chat
9 discard 104 acr-nema 532 netnews
11 systat 109 pop2 540 uucp
13 daytime 110 pop3 556 remotefs
15 netstat 111 sunrpc 563 nntp+ssl
17 qotd 113 auth 587
19 chargen 115 sftp 601
20 ftp-data 117 uucp-path 636 ldap+ssl
112 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
