Optional Services IP MAC Mapping
PrivProtocol Select the authentication protocol used for transferring the authenticated privacy
key.
Authentication Select the authentication method for user and privacy key, either authentication
with or without privacy.
SNMP trap for even notification
FortiWAN (SNMP agent) sends traps to a SNMP manager for notification when significant events occur. Enable the
function by configuring the settings of Log Notification to FortiWAN (See "Notification").
FortiWAN MIB
The FortiWAN MIB defines the structure of the management data maintained on FortiWAN. It contains the fields,
information and traps that are specific to a FortiWAN units. The FortiWAN MIB file is available on the Fortinet
Customer Service & Support website, https://support.fortinet.com/.
IP MAC Mapping
Users can specify the IP-MAC table by classifying periods like peak hours and idle hours. Once the IP-MAC table is set
up, a packet from a certain IP address can pass through FortiWAN only when its MAC address matches the table list
and time period.
FortiWAN provides log mechanism to the IP MAC Mapping service, see "Log".
E : Enable/Disable
When : Select the time period: busy hour, idle hour and all time. All time is defined in 24-hour
system. For details, refer to [System] -> [Busyhour Settings] (See "Busyhour
Settings").
IP Address : Enter the IP address of the network interface card.
MAC Address : Enter the MAC address of the network interface card.
L : Check it to activate the rule and record results in log file. Otherwise, the rule is inact-
ive and data will not be stored.
244 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
