Fortinet FortiWAN - FQDN; Tunnel Status

Statistics FQDN
FQDN
The IPv4 and IPv6 addresses of the FQDNs that connected via FortiWAN are shown in this page.
IPv4 FQDN
FQDN : The FQDN connected via FortiWAN.
IPv4 Address : IPv4 addresses of the FQDN connected via FortiWAN. It maintains 20 addresses at
most.
IPv6 FQDN
FQDN : The FQDN connected via FortiWAN.
IPv6 Address : IPv6 addresses of the FQDN connected via FortiWAN. It maintains 20 addresses at
most.
Tunnel Status
It shows tunnel routing status based on the settings in [Service] -> [Tunnel Routing]. Here administrators are able to
monitor tunnel’s working status and view its statistics in the last 3 Seconds, 1 Minute, etc. Administrators can enable
Automatic Refresh and choose a suitable time interval to refresh statistics automatically.
Tunnel Group : Select the tunnel group from the menu.
Automatic Refresh : Enable it and choose time interval for refreshing.
Tunnel Status : Green = OK; Red= Failed.
Tunnel : Shows all the tunnels the selected tunnel group includes.
3-Second Statistics : Shows statistics obtained in the last 3 seconds.
1-Minute Statistics : Shows statistics obtained in the last 60 seconds.
Status : Shows tunnel status.
Default Rule Subnets
Local Subnet : Shows local unit subnet used in tunnel routing default rules.
250 FortiWAN Handbook
Fortinet Technologies Inc.