Reports Create a Report
Create a Report
Report’s reporting function is calendar-based (in the upper right portion of the UI screen). Reporting can be done for a
specific day, by highlighting that date in the calendar. Reporting can be done over a range of dates by specifying the
start date and the end date on the Calendar.
Enable Reports
Please complete the necessary setting to enable FortiWAN Reports via Log > Reports (See "Enable Reports") or
Reports > Settings > Reports (See "Settings > Reports"), or data is unavailable for Reports.
Select a Report Type
On the left of the main page is the Category Area where you can select a report type.
Specify a Date or Date Range
At the upper right corner of the Display Area exists a date selector where you can specify a single date or date range.
Click on the magnifier icon next to the date selector to start with date selection.
l Time between 00:00 to 23:59 (of a selected date)
l Days from start to end if Date Range specified (max 90 days)
Single Date
Start date:
l Click on the field under “Start date” to call up a calendar for further selection.
l Select a date from the calendar, and reports will be generated on the selected date from 00:00 to 23:59. The
selected date is highlighted in white, while the other dates are displayed in gray, and today’s date is circled in
yellow.
l Click the right or left arrow to go to the next or previous month.
l Click Apply to complete date selection, and reports will then be generated accordingly.
l Choose a different report type from the Category Area to generate reports on the same date selected if needed.
Date Range
To select a date range:
270 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
