EasyManua.ls Logo

Fortinet FortiWAN - SNMP

Fortinet FortiWAN
311 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SNMP Optional Services
SNMP
SNMP (Simple Network Management Protocol) is often used in managing TCP/IP networks by providing system
information and sending event notifications to a SNMP manager. A SNMP manager is typically a host running the
SNMP manager application. The SNMP manager communicates with the SNMP agent running on a FortiWAN unit;
sends out SNMP requests and receives incoming event notification (SNMP trap) from the SNMP agent. The agent
responds FortiWAN's system information for SNMP requests and sends SNMP traps to the SNMP manager.
To monitor your FortiWAN system via SNMP, you must:
l Compile the FortiWAN MIB file to your SNMP manager.
l Make sure at least one network interface is well-configured to send out SNMP traps and receive SNMP requests.
The SNMP manager can communicate with a FortiWAN unit via the IP addresses configured on the localhost of a
WAN port, DMZ port or LAN port (See "Network Settings").
l
Make sure SNMP is acceptable to FortiWAN's firewall (See "Firewall").
l Configure SNMP settings and Event Notification to FortiWAN unit.
SNMP agent configuration
To configure SNMP settings, go to Service > SNMP. Check the box Enable SNMP to enable SNMP agent on
FortiWAN and select the SNMP version. FortiWAN supports SNMP v1, v2 and v3 protocols.
SNMP v1/2
Community Enter the community which the SNMP belongs to.
System Name Enter a string to represent this system.
System Contact Enter a string to represent a person in charge of this system.
System Location Enter a string to represent the location of this system.
SNMP v3
Community Enter the community which the SNMP belongs to.
System Name Enter a string to represent this system.
System Contact Enter a string to represent a person in charge of this system.
System Location Enter a string to represent the location of this system.
Username Enter user name used for authentication.
Password Enter the password used for authentication.
Privacy Key Enter the privacy key code. Eg: 12345678ABCDEFGHUI.etc.
AuthProtocol Select the authentication protocol used for transferring the authenticated pass-
word, either MD5 or SHA.
FortiWAN Handbook
Fortinet Technologies Inc.
243

Table of Contents

Other manuals for Fortinet FortiWAN

Related product manuals