Fortinet FortiWAN - Page 162

Load Balancing & Fault Tolerance Tunnel Routing
Filters
Source Destination Service Routing Policy Fail-Over
Tunnel WAN Any WAN4 No-Action
Any Address WAN Any Default Policy No-Action
The settings for the branch1
Set the field Local Host ID as Branch1
Local Host ID: Branch1
Tunnel Group
Group Name Remote Host
ID
Algorithm Tunnels
Local IP Remote IP Weight
Branch1-HQ HQ Round-Robin 1.1.1.1 3.3.3.3 1
Routing Rules
Source Destination Service Group Fail-Over
Any Address WAN Any Branch1-HQ No-Action
The settings for the branch2
Set the field Local Host ID as Branch2
Local Host ID: Branch2
Tunnel Group
Group Name Remote Host
ID
Algorithm Tunnels
Local IP Remote IP Weight
Branch2-HQ HQ Round-Robin 2.2.2.2 3.3.3.3 1
Routing Rules
Source Destination Service Group Fail-Over
192.168.2.0/255.255.255.0 192.168.1.0/255.255.255.0 Any Branch2-HQ No-Action
162 FortiWAN Handbook
Fortinet Technologies Inc.