Notification Log
Types of Events to Notify
Event Types to Notify Check to select the events. Enter the threshold to number of connections, rate of con-
nections and total WAN traffic to trigger the notification.
WAN link failure and recovery Send notification when a WAN link fails or recovers
from failure. A integer used to indicate the failed or
recovered WAN link.
Account change Send notification when an account is added,
removed or password-changed.
HA slave failure and recovery Send notification when the slave unit in HA deploy-
ment fails or recovers from failure. Integer 1 indic-
ates the slave unit recovered and integer 2
indicates it failed.
HA takeover Send notification when the local unit in HA deploy-
ment was took over by its slave unit. Integer 1 indic-
ates the truth of HA takeover and integer 2
indicates the falseness of HA takeover.
VRRP takeover Send notification when the local unit in VRRP
deployment was took over by its backup unit.
Integer 1 indicates the truth of VRRP takeover and
integer 2 indicates the falseness of VRRP
takeover.
Number of connections reaches
___
Set the threshold and the number of connections
being processed in system will be sent as an event
notification when it exceeds the threshold.
Rate of connections reaches___
/ sec
Set the threshold and the number of connections
established in system every second will be sent as
an event notification when it exceeds the
threshold.
Total WAN traffic reaches ___
Kbps
Set the threshold and the number of current total
WAN traffic (sum of inbound and outbound traffic
of every WAN link) will be sent as an event noti-
fication when it exceeds the threshold.
Select All Click to check all the event types
Clear All Click to uncheck all the event types
FortiWAN Handbook
Fortinet Technologies Inc.
267
To Next Page
Loading...
