How to set up your FortiWAN Web UI and CLI Overview
LAN : Matches sessions coming from or going to LAN.
DMZ : Matches sessions coming from or going to DMZ.
Localhost : Matches sessions coming from or going to FortiWAN.
Any Address : Matches all sessions regardless of its source or destination.
FQDN : Matches sessions coming from or going to FQDN.
IP Grouping Name : Matches sessions coming from or going to the IP addresses that predefined in IP
groups (See "IP Grouping").
Configuration on Input Port
This is for filtering the traffic coming from specified physical ports. Input Port are the item used to evaluate outbound
traffic for only Auto Routing (See "Auto Routing") so far. Ports (normal ports, VLAN ports, redundant LAN\DMZ ports
and aggregated LAN\DMZ ports) defined in [Network Setting > VLAN and Port Mapping] (See "Configurations for
VLAN and Port Mapping") are listed for options:
Port X : Matches sessions coming from the specified normal port.
Port X.[VLAN Tag] : Matches sessions coming from the specified VLAN port.
LAN Bridge: [Lable] : Matches sessions coming from the specified redundant LAN port.
DMZ Bridge: [Lable] : Matches sessions coming from the specified redundant DMZ port.
LAN Bonding: [Lable] : Matches sessions coming from the specified aggregated LAN port.
DMZ Bonding: [Lable] : Matches sessions coming from the specified aggregated DMZ port.
Configuration on Service
This is for filtering the established sessions running specified service. It contains some well-known services for options
and user-defined services (TCP@, UDP@ and Protocol#):
l FTP (21)
l SSH (22)
l TELNET (23)
l SMTP (25)
l DNS (53)
l GOPHER (70)
l FINGER (79)
l HTTP (80)
l POP3 (110)
l NNTP (119)
38 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
