Fortinet FortiWAN - arping: Discover and prob hosts on a network by sending ARP requests; diagnose: Get diagnostic information of FortiWAN hardware

How to set up your FortiWAN Web UI and CLI Overview
arp -i <port> -d <hostname>
-a [<hostname>]: Display the entries of the specified hostname. All the entries will be displayed if no hostname
is specified. Hostnames will be displayed in alternate BSD style output format.
-e: Display entries in default (Linux) style.
-s <hostname> <hw_addr>: Manually create an ARP entry mapping for the host hostname with the hardware
address hw_addr. This requires specifying a port via -i port.
-d <hostname>: Remove the entries for the specified host hostname. This requires specifying a port via -i
port.
-i <port>: Specify an network interface (port) of FortiWAN to display, create or remove entries.
<port>: Specify an network interface (port) of FortiWAN in format port#, e.g. port1, port2 and etc.
<hostname>: Specify the target IP address or domain name.
<hw_addr>: Specify the MAC address.
Note: If domain name is to be used in the hostname parameter, the DNS Server must be set in the Web UI [System]-
>[Network Settings]->[DNS Server].
arping: Discover and prob hosts on a network by sending ARP requests
arping <hostname> <link> <index>
Send an ARP request to ask the MAC address of an IP address and display the result.
<hostname>: Specify the target IP address or domain name (MAC address is not supported). Note that domain
name is valid only if parameter <link> is specified as "wan".
<link>: Specify the link or ports that the ARP request is sent through. The valid values are "wan", "dmz" and "lan".
<index>: Specify the index of a WAN link if <link> is specified as "wan". The valid values are 1, 2, 3, ...,etc.
Example:
arping 192.168.2.100 lan will send an ARP request through LAN ports to ask the MAC address of host
192.168.2.100.
arping 10.10.10.10 wan 1 will send an ARP request through WAN link 1 to ask the MAC address of host
10.10.10.10.
Note: If domain name is to be used in the hostname parameter, the DNS Server must be set in the Web UI [System]-
>[Network Settings]->[DNS Server].
diagnose: Get diagnostic information of FortiWAN hardware
diagnose hardware deviceinfo cpu
diagnose hardware deviceinfo disk
diagnose hardware deviceinfo mem
diagnose hardware deviceinfo nic
Get information of FortiWAN's CPU, disk, memory and network interface controllers (NICs).
diagnose hardware ethtool
40 FortiWAN Handbook
Fortinet Technologies Inc.