Fortinet FortiWAN - import: Import the configurations of NAT, Multihoming and Virtual Server; init_reports_db: Set Reports database to factory default; jframe: Enable jumbo frames to support specified MTU size for FortiWANs LAN ports

How to set up your FortiWAN Web UI and CLI Overview
import: Import the configurations of NAT, Multihoming and Virtual Server
import
Type import [Enter] to import the configurations of NAT, Multihoming and Virtual Server to FortiWAN. You have to
manually input the configuration in text after the command prompt “import>” line by line.
Example:
> import
Please enter configuration. terminate with a line constaining exactly:
1) 'apply' to apply, or
2) 'abort' to abort.
import> nat {
import> wan-array {
import> wan@1 {
import> rule-array {
import> rule { #1
import> source 10.10.10.55-10.10.10.77
import> destination 10.12.10.55-10.12.10.70
import> translated 10.12.104.232
import> }
import> }
import> }
import> }
import> }
import> apply
Start to apply configuration of nat...
Settings are applied for page Service -> Nat
>
Type abort in command prompt import> to leave the prompt any time. Please refer to the exported configurations
(displayed by command export or saved via Web UI. See "Configuration File" in "Administration") for the import
format.
init_reports_db: Set Reports database to factory default
init_reports_db
Set FortiWAN's Reports database to factory default. All the report data will be deleted. Please make sure the database
is backed up if it is necessary (See "Reports Database Tool").
jframe: Enable jumbo frames to support specified MTU size for FortiWAN's LAN ports
jframe show
Get the port number and the MTU size of FortiWAN's LAN ports
jframe set <port> <mtu>
Enable jumbo frames on the LAN port by specifying a MTU size that is larger than 1500.
<port>: The port# of LAN port, such as port1, port2...and etc.
<mtu>: The MTU size.
Note that applying for Network Setting resets the MTU on LAN ports to 1500.
42 FortiWAN Handbook
Fortinet Technologies Inc.