How to set up your FortiWAN Configuring Network Interface (Network Setting)
Configurations on FortiWAN A
Go to Network Setting > LAN Private Subnet > IPv4 Basic Subnetand select the subnet 192.168.10.0/24 to
configure.
Check the checkbox Enable DHCP Relay and configure the setting below.
DHCP Relay Server
192.168.100.100
DHCP Relay Agent IP
192.168.10.254
Go to Service > Tunnel Routing and define a Tunnel Group with the two tunnels below:
Local IP Remote IP
10.10.10.10 11.11.11.11
20.20.20.20 21.21.21.21
Define the Routing Rule.
Source Destination Service Group
192.168.10.0/255.255.255.0 192.168.100.0/255.255.255.0 Any Group Name
Configurations on FortiWAN B
Go to Service > Tunnel Routing and define a Tunnel Group with the two tunnels below:
60 FortiWAN Handbook
Fortinet Technologies Inc.
To Next Page
Loading...
